[ad_1]
Cleaning Gas Grill Burners
To clean your burners, start by looking them all over for any surface debris. If you see any, take your grill brush, putty knife, or even steel wool to remove it.
Take your grill brush and sweep it over the burners moving up and down the tubes, being careful not to brush side to side and risk further blocking the gas ports.
Look for clogs or debris blocking the holes in the burner tubes. Common clogs can be caused by grease, food particles, or insect nests.
Gently use a small brush, pipe cleaner, or a specialized burner cleaning rod to clear out each hole in the burner tube. Be careful not to damage the holes.
For tougher clogs, carefully use a small drill bit, paperclip, or toothpick to dislodge any debris from the burner holes. Do this gently to avoid enlarging the holes. If your grill has the type of burners that come with a crossover channel, you can use that same small tool to scrape away at any soot or debris that’s accumulated.
If you have a bottle brush or dedicated burner cleaner, now is the time to grab that and gently push it through the burner tube to dislodge soot and debris. You can also blow the debris out of the tube using canned or compressed air, just be sure to wear safety goggles if you choose to go this route.
Give your burners a thorough shake to remove any residual debris, then wipe them down with your grill brush once more to take care of any lingering grime.
Inspect the burner tubes for any signs of damage or corrosion. If the tubes are damaged, they should be replaced.
Reassemble your grill, and you’re good to go!
[ad_2]
Source link
